Wax-like head sculpture skeleton; to shape an equal-sized head with slime, at least use a skeleton with a pillar. The function of the skeleton is to support the slime and ensure that your work is erected before it is completed. The homemade skeleton is simple. Drill a hole in the middle of a wooden board and tap a steel bar in the hole. If you don't want to drill, you can fix the nail on the board. Once the skeleton is made, you can fix it with a C-clamp. On the working table or on the wax sculpture table, the scaffolding of the tripod has movable wheels, and the adjustable poles allow you to choose the most suitable height for your sculpture. The support planks provide a suitable working area and the workbench can safely support nearly 10 kg of slime.
Sculpting tools and tools for making waxy textures; adding, subtracting, and modeling the slimming process requires a basic tool, and the side of the wooden sculpting tool is suitable for these techniques. The wooden tools are made of rosewood, sometimes I will also The edges of the tool are thinner, sharper and better to use. The other side of the sculpture tool is a small and rough set, which can be pressed into the slime to make details and shape the body. The basic function of the toothed wire ring or cookware is like a target, evenly flattening the surface of the sculpture and smoothing the intersection between the bodies. Wood is also a good tool that you can use to tap anywhere. The burlap is also very convenient for creating the texture of the sculpture surface, which can be done by bundling him into a viscous surface.
Wax making measurement tools and others; calipers are a measurement tool that provides accurate proportional relationships for sculptures. The method used is to first loosen the screws, open the arms of the caliper, place them in the position you want to measure, and measure the size. Tighten the screws to fix the two arms. Then, pick up the calipers and place them in the corresponding parts of your wax sculpture, and compare the dimensions. The diseased wire used for cutting is also an essential tool. It can cut the size of the mud from the large slime or cut it during the hollowing out of the head. You should also have a wire brush to remove the mud from the tool, especially for small and rough mud.
